|
 |
|
|
Snorkeling and DivingAs Mister Glue will bond almost anything to anything (including your fingers) it will help mend all your snorkeling and diving equipment. It will bond rubber to rubber for your fins or rubber to metal for a knife handle. It will repair a tear in your diving suit and remain flexible and waterproof.Mister Glue permanently welds rubber so for a diving suit that has torn or if a seam has come apart, dry the surface and run a very small bean on one side. Press the two surfaces together and within a few short seconds you can go back in the water. Snorkels and masks can be repaired instantly as well if there is a tear or a gasket or seam separates. As Mister Glue will bond two different materials together very well you can bond plastic to rubber as well. If you have a mask or other accessory that is leaking run a small bead along the seam and it will be fixed. Make sure that the surface is dry and clean before you apply the glue. Mister Glue works best when the fit is completely flush. The tighter the fit the better the bond. So, make sure that the two surfaces fit together snugly. Also, Mister Glue is very, very quick. Once you have the two pieces together, particularly with rubber, you will have no time to move them around to get them in the 'right' place. So, before you apply the glue, practice putting the two pieces together so you know where they are going. Mister Glue is an industrial cyanoacrylate. That means it is a very powerful super glue. Much, much |
stronger. It dries clear, flexible and because the solvents have been distilled out, it will not dry out in the bottle.  |
 |
